- Описание
- Спецификация
- Dimensions
- Отправить запрос
Series: C - Capstans
Planetary capstans
Equipped with a cast iron capstan head mounted on a heavy duty planetary gearbox. Its drive is set in a watertight tube frame providing extra protection. Pneumatic drives are also available - on request. Capstans up to 15 tons can be offered upon request.
Wormgear capstans
Provided with self-braking worm gear drives powered by electric, hydraulic or pneumatic motors (on-deck or below-deck types are available). An on-deck drive is equipped with a waterproof motor for intermittent use. A below-deck drive is equipped with a dripwater-proof motor and a mounting plate with an extra self-aligning bearing for high static loads. Pneumatic drives are also available - on request.
Standard features
- Vertical cast iron warping head according to ISO 6482
- Heavy duty wormgear or planetary gearbox
- Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 5010
- IP 54 braked motor 400 VAC / 3-phases / 50 Hz for planetary capstans
- Orbit or radial piston type hydraulic motor
- IP 56 TENV cast iron 400 V AC / 3-phase / 50 Hz non-braked motor for on-deck wormgear capstans
- Single speed and one direction only (electric capstans only)
- IP 54 400 V AC / 3 phases / 50 Hz non-braked motor for under-deck wormgear capstans
General options for winches
- Фланцевый разделитель барабана
- Нарезной барабан
- Крышка безопастности барабана
- Натяжной ролик
- Шпиндельный конечный выключатель
- ДУП + Шпиндельный конечный выключатель
- Кулачковая муфта
- Фрикционная муфта
- Натяжной выключатель
- Пневматический конечный выключатель
- Ручной ленточный тормоз
- Гидравлический ленточный тормоз
- Пульт управления
- Пневматической клапан управления
- Раскладчик троса
- Дополнительное крепление троса
- Контактное кольцо
- Аварийная кривошипная рукоятка для ручного привода (на электрическом двигателе)
WLL 1st layer [kg]: | 2300 kg |
Speed [m/min]: | 10.0 m/min |
Mass: | 275 kg |
Rope diameter: | 30 mm |
Motor power: | 4.00 kW |
Voltage main supply: | 400V AC 3 phase |
Neck diameter: | 195 mm |
*For more storage, higher / lower speed or change any parameter, please contact with us
Dimension D1: | 195 mm |
Dimension D2: | 406 mm |
Dimension D3: | 500 mm |
Dimension D4: | 600 mm |
Dimension L1: | 1000.0 mm |
Dimension L2: | 5.0 mm |
Dimension L3: | 181 mm |
Dimension L4: | 1104 mm |
Hole diameter: | 18.0 mm |
Dimension A1: | 12x30 ° |